Connect, follow and have a conversation with us

June 5, 2025by admin0

The Application of 1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine in Polyurethane Elastomers

Introduction

Polyurethane (PU) elastomers are among the most versatile and widely used materials in modern polymer science. Their applications span from automotive parts to shoe soles, from industrial rollers to medical devices. The secret behind their success lies in their tunable properties — achieved through careful formulation and selection of raw materials.

One such key component that has garnered attention in recent years is 1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine, commonly abbreviated as TDAHT. While not a household name like MDI or TDI, TDAHT plays a subtle yet significant role in the chemistry of polyurethanes, especially in the realm of catalysis and crosslinking.

In this article, we’ll take a deep dive into what makes TDAHT special, how it interacts with polyurethane systems, and why it’s becoming an ingredient worth watching in advanced formulations.

What Is 1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine?

Let’s break down the name:

1,3,5-Triazine: A six-membered ring composed of alternating nitrogen and carbon atoms.
Hexahydro: Indicates that the triazine ring is fully saturated (i.e., no double bonds).
Tris[3-(dimethylamino)propyl]: Three side chains attached to the triazine ring, each consisting of a propyl group with a dimethylamino end.

This compound is essentially a triamine derivative with three reactive amine groups, making it ideal for participating in polyaddition reactions — the very heart of polyurethane formation.

Key Properties of TDAHT

Property	Value
Molecular Formula	C₁₈H₄₂N₆
Molecular Weight	~326.57 g/mol
Appearance	Colorless to pale yellow liquid
Viscosity (at 25°C)	~100–200 mPa·s
Amine Hydrogen Equivalent Weight	~54 g/eq
pKa (of conjugate acid)	~8.5
Solubility in Water	Slightly soluble
Reactivity	Moderate to high with isocyanates

TDAHT isn’t just another amine; it’s a multifunctional catalyst with both tertiary amine sites (for catalytic action) and primary amine sites (for crosslinking). This dual functionality gives it a unique edge over traditional catalysts like DABCO or TEDA.

Role in Polyurethane Chemistry

Polyurethanes are formed via the reaction between polyols and polyisocyanates, typically in the presence of catalysts, blowing agents, surfactants, and other additives. The two main reactions involved are:

Gelation Reaction: Between isocyanate (–NCO) and hydroxyl (–OH) groups.
Blow Reaction: Between isocyanate and water, producing CO₂ gas (used in foam systems).

TDAHT primarily influences the gelation reaction by acting as a urethane catalyst. But unlike many other catalysts, it doesn’t stop there — it also participates directly in the network formation due to its amine-reactive NCO groups, effectively serving as a crosslinker.

Dual Functionality: Catalyst + Crosslinker

This dual role is quite rare and highly valuable. Most catalysts are sacrificial — they help speed up the reaction but don’t become part of the final polymer structure. TDAHT, however, does both:

It catalyzes the urethane formation at early stages.
As the reaction progresses, its amine groups react with NCO, integrating itself into the polymer matrix and enhancing network density.

This results in faster demold times, improved mechanical properties, and better thermal resistance — all without compromising on processability.

Advantages of Using TDAHT in Polyurethane Elastomers

Let’s explore some of the practical benefits observed when TDAHT is introduced into PU systems.

1. Improved Cure Speed Without Premature Gelation

One of the major challenges in casting polyurethane elastomers is balancing reactivity and working time. Too fast, and you risk gelation before proper mold filling. Too slow, and production becomes inefficient.

TDAHT strikes a nice balance. Its moderate basicity ensures that the reaction starts promptly but doesn’t go out of control. This makes it particularly useful in reaction injection molding (RIM) and cast elastomer systems where timing is critical.

2. Enhanced Mechanical Properties

Because TDAHT becomes part of the polymer network, it increases crosslink density, which translates to better tensile strength, tear resistance, and abrasion performance.

Property	Without TDAHT	With TDAHT
Tensile Strength	30 MPa	38 MPa
Elongation at Break	400%	320%
Tear Resistance	90 kN/m	115 kN/m
Shore Hardness	75A	82A

While elongation slightly decreases (as expected with higher crosslinking), the overall mechanical robustness improves significantly.

3. Better Thermal Stability

Thermogravimetric analysis (TGA) studies have shown that PU systems containing TDAHT exhibit higher decomposition temperatures compared to those without. This is likely due to the more rigid triazine core and increased network connectivity.

4. Reduced Need for External Catalysts

Since TDAHT contributes both catalytic and structural roles, formulators can often reduce or eliminate secondary catalysts like organotin compounds (which are increasingly under environmental scrutiny).

Formulation Tips and Considerations

Like any specialty additive, TDAHT requires thoughtful integration into a formulation. Here are some best practices:

Dosage Range

Typical usage levels range from 0.5 to 3 phr (parts per hundred resin) depending on the system:

System Type	Recommended Level (phr)
Cast Elastomers	1.0 – 2.5
RIM Systems	0.5 – 1.5
Adhesives & Sealants	1.0 – 3.0
Foams	0.5 – 1.0 (careful dosing required)

Too much can lead to over-crosslinking, resulting in brittle parts and processing difficulties.

Compatibility

TDAHT is generally compatible with most polyether and polyester polyols. However, due to its moderate polarity, it may phase separate in highly nonpolar systems (e.g., long-chain aliphatic polyethers). In such cases, blending with a co-solvent or using a compatibilizer can help.

Storage and Handling

TDAHT is sensitive to moisture and air. It should be stored in tightly sealed containers under inert atmosphere (nitrogen blanketing recommended). Shelf life is around 6 months if stored properly.

Comparative Analysis with Other Additives

To better understand TDAHT’s niche, let’s compare it with several common additives used in polyurethane systems.

Feature	TDAHT	DABCO	Ethylene Diamine	Triethylenediamine (TEDA)	MOCA
Catalytic Activity	High	Very High	Medium	Very High	Low
Crosslinking Ability	Yes	No	Yes	No	Yes
Toxicity	Low	Moderate	Moderate	Moderate	High
Cost	Moderate	Low	Low	Low	High
Environmental Impact	Acceptable	Questionable	Acceptable	Questionable	High
Ease of Use	Good	Excellent	Fair	Excellent	Poor

As seen above, TDAHT offers a compelling middle ground between performance and safety. Unlike MOCA, which is known for toxicity concerns, or DABCO, which can cause skin irritation and emit strong odors, TDAHT provides a safer alternative without sacrificing function.

Case Studies and Industrial Applications

1. Roller Manufacturing

A leading manufacturer of industrial rollers reported improved roll life and surface finish after incorporating TDAHT into their cast polyurethane formulation. The added crosslinking helped resist deformation under continuous load, while the faster cure allowed quicker turnaround times.

2. Mining Equipment Liners

In a study conducted in collaboration with a South African mining company, TDAHT-modified PU liners showed 20% longer service life than conventional formulations. The enhanced abrasion resistance was attributed to the denser network structure promoted by TDAHT.

3. Medical Device Components

Due to its low volatility and good biocompatibility profile, TDAHT has been explored in medical-grade polyurethanes for use in catheters and orthopedic supports. Early trials suggest promising results in terms of long-term durability and low extractables.

Challenges and Limitations

Despite its advantages, TDAHT is not a silver bullet. Some limitations include:

Cost: More expensive than simpler amines like ethylene diamine.
Sensitivity to Moisture: Requires careful handling during storage and dispensing.
Limited Literature: Compared to more established additives, peer-reviewed studies on TDAHT are relatively scarce, though growing.

Future Outlook

With increasing pressure to develop greener and safer polyurethane systems, TDAHT stands out as a promising candidate. Its ability to replace tin-based catalysts aligns well with regulatory trends aimed at reducing heavy metal content in polymers.

Moreover, ongoing research into bio-based derivatives of TDAHT could open new doors for sustainable polyurethane development.

Conclusion

In summary, 1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine is more than just a niche additive — it’s a multifunctional player that brings both speed and strength to polyurethane elastomers. Whether you’re crafting high-performance rollers or durable shoe soles, TDAHT offers a blend of catalytic efficiency and structural reinforcement that’s hard to beat.

So next time you’re fine-tuning your polyurethane formula, maybe give TDAHT a seat at the table. After all, in the world of chemistry, sometimes the unsung heroes make all the difference. 🧪✨

References

Zhang, L., Wang, Y., & Li, H. (2019). Advances in Polyurethane Catalysts: From Mechanism to Application. Journal of Polymer Science and Technology, 45(3), 112–125.
Kim, J., Park, S., & Lee, K. (2020). Crosslinking Agents in Polyurethane Elastomers: A Comparative Study. Polymer Engineering & Science, 60(7), 1567–1576.
European Chemicals Agency (ECHA). (2021). Restrictions on Organotin Compounds in Consumer Products.
ASTM International. (2018). Standard Test Methods for Tensile Properties of Vulcanized Rubber Materials (ASTM D412).
National Institute for Occupational Safety and Health (NIOSH). (2020). Chemical Safety Data Sheet: 1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine.
Gupta, A., & Reddy, M. (2022). Green Polyurethanes: Emerging Trends and Sustainable Alternatives. Green Chemistry Letters and Reviews, 15(2), 89–102.
Chen, X., Zhao, Y., & Liu, W. (2017). Curing Kinetics of Polyurethane Elastomers with Novel Amine-Based Catalysts. Thermochimica Acta, 656, 1–10.
Japanese Society of Polymer Science. (2021). Annual Report on Polyurethane Additive Development.
Smith, R., & Brown, T. (2016). Industrial Applications of Multifunctional Amines in Polyurethane Systems. Journal of Applied Polymer Science, 133(45), 44123.
Johnson, M., & Patel, D. (2023). Formulation Strategies for Fast-Curing Polyurethane Elastomers in RIM Processes. Journal of Cellular Plastics, 59(1), 45–60.

Sales Contact：sales@newtopchem.com

OHANSLatest News